DigiDesign 882/20 Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt nagrywający DigiDesign 882/20. DigiDesign 882/20 14 stron. I/o audio interface

In stand-alone mode, the 882/20 only op-

erates at a 44.1kHz sample rate. If you wish

to convert analog signals into 48kHz digital

audio, you must launch Pro Tools (or any other

software which supports the 882/20 I/O) to

change the default sample rate.

To use the 882/20 I/O as a stand alone D/A

converter:

Make sure that a digital device providing

a word clock signal is connected to the

S/PDIF input of the 882/20 I/O and that

the device is powered on.

Turn on the 882/20 I/O. The 882/20 I/O

will search for a valid word clock on its

S/PDIF input.

When a valid word clock lock is recog-

nized, the 882/20 I/O will enter digital

sync mode and function as a stand-alone

D/A converter using the S/PDIF input and

analog outputs 1–2.

The 882/20 I/O sample rate is determined

by the sample rate that it detects on its

S/PDIF input.

To return the 882/20 I/O to Pro Tools-based

operation:

Turn on your computer.

– or –

If your computer is on, launch Pro Tools.

Using the 882/20 I/O 7