Epson 500DN - B Color Inkjet Printer Korzystanie z instrukcji - Strona 3

Przeglądaj online lub pobierz pdf Korzystanie z instrukcji dla Drukarka Epson 500DN - B Color Inkjet Printer. Epson 500DN - B Color Inkjet Printer 4 stron. Business color ink jet printer
Również dla Epson 500DN - B Color Inkjet Printer: Podręcznik Start Here (9 strony), Biuletyn wsparcia produktu (5 strony), Instrukcja instalacji sieciowej (24 strony), Deklaracja zgodności (4 strony), Specyfikacja produktu (2 strony)

4. To feed the media all the way through the printer, hold down the d button on the printer control panel. Continue

feeding media until enough emerges for you to attach it to your take-up roller, if you are using one.

Caution:

NEVER pull roll media through the printer with your hands or you may damage the

printer. ALWAYS use the d or u button to feed media. Check to make sure the media

is straight all the way through the "web" (paper path of the roll media feeding

system). Adjust the media position, if necessary.

5. Send your roll media print job as described in your RIP software documentation

or your printer documentation.

Note:

If you need to cancel a print job, first cancel any queued print jobs using the Windows

Print Monitor utility in your computer's system tray. Then press the + Cancel button

on the printer's control panel to cancel the current print job.

6. When your print job is completed, do one of the following:

To print additional jobs on the same media, simply send the other print jobs.

•

To remove the printed media, but leave the same media loaded, cut the media where it is output from the front of

•

the printer and remove the printed media.

Hold down the d button on the printer control panel to feed more media through the printer until enough

emerges for you to attach it to your take-up roller, if you are using one.

To remove the roll media from the input reel, cut off the printed media as shown above. Then hold down the

•

u button on the printer control panel until the media feeds all the way back through the printer and remove the

roll media.

Note:

The printer will not enter power-saving mode while roll media is loaded.

Roll Media Tips

For best results, always ensure the roll media loads straight into and out of the printer. To avoid reloading roll media,

•

always cut off printed media where it is output from the front of the printer. You also use less media this way.

Store unused media in a sealable plastic bag to protect it from dust and humidity.

•

ALWAYS use

the media feed

buttons

Cut media where it is

output at front of printer