Epson 570e - LQ B/W Dot-matrix Printer Podręcznik z informacjami o produkcie - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik z informacjami o produkcie dla Drukarka Epson 570e - LQ B/W Dot-matrix Printer. Epson 570e - LQ B/W Dot-matrix Printer 18 stron. Warranty statement
Również dla Epson 570e - LQ B/W Dot-matrix Printer: Skrócona instrukcja obsługi (15 strony), Specyfikacje (2 strony), Ograniczona gwarancja (1 strony)

Epson 570e - LQ B/W Dot-matrix Printer Podręcznik z informacjami o produkcie
EPSON LQ-570e
Thickness
0.0025 to 0.0055 inch (0.065 to 0.14 mm)
Cut sheet feeder: 0.0028 to 0.0055 inch (0.07 to
0.14 mm)
Weight
14 to 24 lb (52 to 90 g/m
Cut sheet feeder: 18 to 24 lb (64 to 90 g/m
Width
3.9 to 10.1 inches (100 to 257 mm)
Length
3.9 to 14.3 inches (100 to 364 mm)
Copies
1 original up to 4 copies
Thickness
0.0047 to 0.015 inch (0.12 to 0.39 mm)
Weight
12 to 15 lb (40 to 58 g/m
Binding
Line glue at the top of form
Size
No. 6
No. 10
Thickness
0.0063 to 0.0205 inch (0.16 to 0.52 mm)
Weight
12 to 24 lb (45 to 90 g/m
Width
Front and top: 3.9 to 7.9 inches (100 to 200 mm)
Cut sheet feeder: 3.9 to 5.8 inches (100 to 148 mm)
Length
Front: 5.8 to 7.9 inches (148 to 200 mm)
Top: 3.9 to 7.9 inches (100 to 200 mm)
Cut sheet feeder: 3.9 to 5.8 inches (100 to 148 mm)
Thickness
0.0087 inch (0.22 mm)
Weight
51 lb (192 g/m
Width
4 to 10 inches (101.6 to 254 mm)
Length
4 to 22 inches (101.6 to 558.8 mm)
Copies
1 original up to 4 copies
Thickness
Printable area
0.0025 to 0.015 inch (0.065 to 0.39 mm)
Perforated edges
up to 0.035 inch (0.9 mm)
Weight (not multipart)
Weight (1 multipart sheet) 12 to 15 lb (40 to 58 g/m
Binding
Point glue or paper staples on both sides
(front, bottom, or rear entry)
4 - EPSON LQ-570e
2
)
2
)
6.5
3.6 inches (165 92 mm)
9.5
4.1 inches (241 105 mm)
2
)
2
)
14 to 22 lb (52 to 82 g/m
2
)
2
)
The continuous multipart forms should be securely joined
together along the left and right edges by crimping.
Crimping should be pressed in from the original sheet side
and go completely through all copy sheets.
The ratio of the cut/uncut length at the perforation should
2
)
be between 3:1 and 5:1.
The perforation between pages should not extend all the
way to the edges of the paper.
At the perforation between pages, the horizontal and
vertical perforation cuts should not cross.
The thickness of the perforation part when extended should
be 1 mm or less.
Label size (minimum)
Backing sheet width
Backing sheet length
Backing sheet thickness
Total thickness
Label weight
Width
8.5 0.12 inch (216 3 mm)
Thickness
0.0028 to 0.0035 inch (0.07 to 0.09 mm)
Weight
14 to 22 lb (52 to 82 g/m
Printing starts at "0" on the scale. The unprintable area is to the
left of the "0".
4/00
0.938 2.5 inches (23.8 63.5 mm)
0.1 inch (2.5 mm) corner radius
4 to 10 inches (101.6 to 254 mm)
4 to 22 inches (101.6 to 558.8 mm)
0.0028 to 0.0035 inch
(0.07 to 0.09 mm)
0.0063 to 0.0075 inch
(0.16 to 0.19 mm)
17 lb (64 g/m
2
)
2
)