Axxess TYTO-01 Instrukcja instalacji
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wzmacniacz Axxess TYTO-01. Axxess TYTO-01 8 stron. Toyota digitalamplifier interface 2001-2015
Drukuj stronę
INTERFACE COMPONENTS
• TYTO-01 harness
• TYTO-01 interface
• 16-pin harness with stripped leads
APPLICATIONS
See inside front cover
AxxessInterfaces.com
Toyota Digital Amplifier Interface
Visit
AxxessInterfaces.com
for more detailed information about the product and up-to-date
vehicle specific applications
INTERFACE FEATURES
• Designed for amplified models
• Retains balance and fade
• Micro-B USB updatable
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
TYTO-01
I N S TA L L AT I O N I N S T R U C T I O N S
2001-2015
TABLE OF CONTENTS
Connections .........................................................2-3
Installation .............................................................3
Programming .........................................................3
Audio level adjustment .........................................3
Wiring diagram ......................................................4
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
• Small flat-blade screwdriver
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 11/28/18 INSTTYTO-01