Digiever DS-8500-RM UHD Series Instrukcja szybkiej instalacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Sprzęt sieciowy Digiever DS-8500-RM UHD Series. Digiever DS-8500-RM UHD Series 14 stron.
Drukuj stronę Hard Disk Installation
Please follow the steps as illustrated below to install the hardware:
Take out the disk tray from NVR.
Install the hard disk in each tray and
lock the disk with four screws. Ensure
the disk holes match the holes at the
base of disk tray.
Insert the disk tray into NVR and push
it to the end.
Connect the Ethernet cable to the port
of 2.5 Gigabit LAN.
Connect the power cord to power
connector.
Turn on the server and there is a beep
to indicate the NVR is in booting
process. Please wait for minutes until
NVR
beeps
another
installation of NVR is complete right
now.
7
time.
The