Epson C276001 - FX 980 B/W Dot-matrix Printer Skrócona instrukcja obsługi - Strona 16
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarka Epson C276001 - FX 980 B/W Dot-matrix Printer. Epson C276001 - FX 980 B/W Dot-matrix Printer 16 stron. Warranty statement
Również dla Epson C276001 - FX 980 B/W Dot-matrix Printer: Specyfikacje (2 strony), Ograniczona gwarancja (1 strony)
Drukuj stronę
If Your Printer Stops Printing Unexpectedly...
Check the printer's control panel lights and follow the appropriate instructions below. For more information,
see Chapter 7 of your User's Guide.
Cause
The printer is paused.
You moved the paper release lever while paper
from another paper source was in the paper
path.
Cause
No paper is loaded in the selected paper source
or paper is not loaded correctly.
Paper is jammed in the printer.
Cause
Continuous paper is not fed to the standby
position.
A single sheet of paper is not fully ejected.
Paper is jammed in the printer.
The printer stops printing and the Pause light is on.
Solution
Press the Pause button to resume printing.
Move the paper release lever back to the appropriate position and
press the Load/Eject button to feed the paper out of the paper path.
Then set the lever to the position you want to use. Press the Pause
button to turn off the Pause light, if necessary.*
*If you are using the pull tractor, see your User's Guide for instructions.
The Paper Out and Pause lights are on.
Solution
Load paper in the printer, then press the Pause button to turn off
the Pause light, if necessary.
See "Clearing Paper Jams" on page 10.
The Paper Out light is flashing and the Pause light is on.
Solution
Tear off the printed document at the perforation; then press the
Load/Eject button. The printer feeds the paper to the standby
position. Press the Pause button to turn off the Pause light.
Press the Load/Eject button to eject the sheet. Then press the Pause
button to turn off the Pause light, if necessary.
See "Clearing Paper Jams" on page 10.