Digiever DFS-8200-RM Series Instrukcja szybkiej instalacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Serwer Digiever DFS-8200-RM Series. Digiever DFS-8200-RM Series 14 stron. Failover server
Drukuj stronę Hard Disk Installation
Please follow the steps as illustrated below to install the hardware:
Take out the disk tray from
Server.
Install the hard disk in each tray
and lock the disk with four
screws. Ensure the disk holes
match the holes at the base of
disk tray.
Insert the disk tray into the
Server and push it to the end.
Connect the Ethernet cable to the port
of 2.5 Gigabit LAN.
Connect the power cord to power
connector.
Turn on the Server and there is a beep
to indicate the Server is in booting
process. Please wait for minutes until
the Server beeps another time. The
installation of the Server is complete
right now.
7