archgon MD Series Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Napęd Blu-ray archgon MD Series. archgon MD Series 4 stron. External optical drive

Troubleshooting

Drive not recognized.

1. Make sure the USB Y-cable and connectors are not damaged and firmly connected at all

three ends.

2. Insert a DVD or CD to allow your PC/MAC to mount a disc.

3. Avoid connecting the drive through a USB hub (for power insufficient consideration).

Cannot open the tray (To tray loading models)

1. Wait until the software activity is finished; or stop the software activity and then press eject.

2. Turn off power to the drive, and then insert a small stick or paper clip into the emergency

eject hole to eject the tray.

Cannot read a previous session of a CD-RW disc that has been written to at least twice.

1. Make sure you properly select "import previous sessions" when writing new data to the disc.

2. Always use high-quality media. Always handle discs with care and keep them clean. Deep

scratches, fingerprints or other contaminants on the disc's surface can make it unreadable.

3. Remove the disc from the tray and reinsert it label side up.

Cannot play UHD BD / BD movies (To Blu-ray and UHD Blu-ray models)

1. Install authorized BD or UHD BD playback software

2. Use Ultra HD Blu-ray Advisor Overview to verify if your system meets the minimum

requirements for UHD BD and BD movie playback

http://www.cyberlink.com/stat/bd-support/enu/index.jsp

3. Visit the website of your graphics card manufacturer to confirm both your graphics card and

driver are HDCP compliant. Download and install the latest graphics card driver.

4. Visit your monitor manufacturer to confirm your monitor is HDCP compliant.

Cannot write to disc

1. Use the authorized software.

2. Contact the software supplier (or check the appropriate website) to ensure that the software

supports your file format.

3. Reinsert the disc label side up.

4. Ensure that the capacity of the write data is available on disc. (Required capacity may vary

according to write method.)

5. Make sure the USB Y-cable and connectors are not damaged and firmly connected at all

three ends.

Writing errors occur

1. Always use high-quality media. Always handle discs with care and keep them clean. Deep

scratches, fingerprints or other contaminants on the disc's surface can make it unreadable.

2. Ensure that the capacity of the write data is available on disc. (Required capacity may vary

according to write method.)

External Optical Drive