FHC STar 66-MP-EH Instrukcja użytkowania - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja użytkowania dla Adapter FHC STar 66-MP-EH. FHC STar 66-MP-EH 9 stron. For microtargeting platforms
Drukuj stronę
Illustrative Procedure
1. Attach and handtighten standoffs to anchors.
a
2. Attach platform to standoffs with thumbknobs.
3. Attach the center hub to the platform using 2 screws at 90 degrees apart. Make sure the hub is
completely seated in the platform. The hub will sit approximately 1/8" above the top surface of
the platform.
a
4. Use the burr hole entry marker with burr hole bushing and mark the skin and skull, then
remove.
a
L011-44
b
b
Rev. E1
2019-05-13
WARNING: Do not
overtighten thumbknobs. Only
turn an additional 1/4 turn after
contacting mating surface.
b
c
d
Page 7 of 9