CREE LIGHTING SYRIUS SYS-B Series Skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Oświetlenie zewnętrzne CREE LIGHTING SYRIUS SYS-B Series. CREE LIGHTING SYRIUS SYS-B Series 4 stron. Street lights luminaires
Drukuj stronęDisassembly Instructions
Power Supply (PS)
For End User (EU)
For Control Authority (CA)
Disassembly Instructions
End of Life (EL)
N° DOC: DI122RLER0
Rev: 01
19
Light Source (LS)
Power Supply (PS)
PS-EU forSYS-B:
a.Follow the points: A - B - C - D of the instructions in para-
graph PS-CA
c.Disconnect the remaining cables connected to the luminaire
body if any (NEMA, Zhaga)
d.Hold the driver still and unscrew the fixing screws 19
e.Insert the new driver by screwing the fixing screws 19
f. Reconnect the disconnected cables at points "a" and "b" (see
attached wiring diagrams)
g.Lower the support rod 17 while holding the door up
h.Close the door and screw the 6 screws to a torque of 2 Nm
16
15
PS-CA
A.Unscrew 6 screws to open the wiring compartment
B.Secure the door with the appropriate support rod 17
C.Disconnect the ground cable from the LED bar on the
heatsink 7 from connector 15
D.Disconnect the line and neutral cables from the led plate on
the heatsink 7 from the driver terminal block 16 using a
screwdriver
E.Disconnect the remaining cables connected to the driver on
your terminal block 16 with a screwdriver
F.Hold the driver in place and unscrew fixing screws 18 (for
SYS-A-#) or 19 (for SYS-B-#)
G.Extract the driver
Follow instructions in the paragraph LS-CA
Follow instructions in the paragraph PS-CA
Latest Release Date: 18/11/2021