Creek Audio EVOLUTION 50A Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Creek Audio EVOLUTION 50A. Creek Audio EVOLUTION 50A 13 stron. Integrated amplifier
Również dla Creek Audio EVOLUTION 50A: Instrukcje użytkownika (8 strony), Instrukcja obsługi (17 strony)
Drukuj stronę
REMOTE CONTROL
The EVOLUTION 50A's new remote control handset
allows the user to operate the amp and CD/DAC/Pre
and tuner functions. It should be noted that the EVO
remote handset will only operate Creek's EVOLU-
TION 50 and 100 ranges of products and is not able to
switch the mains power.
The operation of the remote is designed to be intuitive,
so we do not intend to describe its functions in great
detail here, have a play!
FIRMWARE AND HARDWARE CON-
FIGURATION
It is possible to check the hardware and firmware
status of your 50A on the display. Turn off the 50A and
then, whilst holding down the INFO key, power up the
EVOLUTION 50A. Once the screen has changed to
"About this unit", release the INFO key. The firmware
version will be displayed along with the presence/ab-
sence of a Sequel phono card and AMBIT tuner card.
This information will be required in the event of an
upgrade or service to the product.
RADIO INTERFERENCE
The EVOLUTION 50A is designed to work properly in
normal domestic operating conditions. However, its
performance could be affected if sited near to a radio
transmitter such as a mobile phone etc. Relocating the
50A or the radio transmitter will normalise the situa-
tion.
Page: 8