Digifly DU8 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor Digifly DU8. Digifly DU8 11 stron. Display unit 8 instrumentation

- name of the next waypoint

- flight time to the next waypoint (TTG)

- distance to the next waypoint (DST)

- ground speed (GS)

Secondary instruments are:

- outside air temperature -in °C or °F- (OAT)

- carburettor temperature -in°C or °F- (TCARB)

- voltmeter (VOLT)

4.variometer. It is an analog instrument able to indicate values from -

10mt/sec to +10mt/sec. The measure unit (mt/sec or ft/min) is

presettable in the Set Up.

Engine area

The bar graphics area has 3 different configurations for 3 engine types.

The engine type is settable by the SetUp page (ENGINE TYPE):

- TYPE 1

: 4 cylinders - liquid cooled (eg. ROTAX 912)

- TYPE 2

: 2 cylinders - air cooled (eg. ROTAX 503)

- TYPE 3

: 2 cylinders - liquid cooled (eg. ROTAX 582)

5.exhausted gas temperatures (EGT1-2-3-4).

Are represented in the left part of the bar graphics.Measure unit (°C or

°F) and alarms are presettable.

Scale: Engine type 1

- LOW (800÷1600 °F) / HIGH (1200÷2000 °F)

Engine type 2/3 - 400÷2000 °F

User Manual

3.4 - Agenda.

Use UP-DOWN ARROW to select a letter.

Use LEFT-RIGHT ARROW to move the cursor.

Press MENU to exit.

3.5 - Set Up.

Parameters can be increased by pressing UP ARROW or decreased by

pressing DOWN ARROW.

To move the cursor from a parameter to another press LEFT ARROW

or RIGHT ARROW.

Press MENU to exit.

The main areas are indicated in the following figure.

User Manual