DIGIFUSION FRT100 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Odbiornik DIGIFUSION FRT100. DIGIFUSION FRT100 14 stron. Digital terrestrial receiver

Drukuj stronę

Getting Started

How to connect
your TV and Receiver
How to connect your TV,
Receiver and VCR
RF IN
Connect your TV aerial cable to the RF IN input on the rear of the receiver.SCART and/or RF leads are connected as in the
diagrams as shown above. It is strongly recommended you use the RF lead supplied in the box.
6
RF Lead
Supplied
TV
RF OUT
AUDIO
TV
VCR
L
RS232
RF IN
RF IN
R
DC
IN
RF Lead
Supplied
TV
RF OUT
AUDIO
TV
VCR
L
RS232
RF IN
DC
R
IN
RF OUT
VCR
RF IN
Using the Receiver
Child Lock
Use the Child Lock to create viewing restrictions on all available channels for a specified time period e.g. from
9PM until 6AM. Once the Child Lock is activated, a Personal Identification Number (PIN) must be entered to
view the TV channels.
The default PIN number for the receiver is 1111. You should change the default PIN to an easily memorised 4
digit number of your choice before setting the Child Lock.
Press Menu, use
to highlight 'SETUP' and press
Scroll down
to 'Child Lock' and press
. Enter the default PIN number (1111).
To change the PIN number, scroll down
to 'Change PIN' and press
Enter the new PIN then re-enter the new PIN again to confirm.
To set the Child Lock select 'Child Lock' and use
To set the start time, use
to highlight 'Start Time' in the Child Lock menu and use
15 minute periods.
To set the end time, use
to highlight 'End Time' and use
Once the Child Lock is activated, you will be required to enter the PIN number at the start time to view TV pictures.
to enter.
to adjust the setting to ON.
to adjust the setting in
to adjust the setting.
19