Ayra ALO 019 Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Skaner Ayra ALO 019. Ayra ALO 019 13 stron. Dual led scanner
Również dla Ayra ALO 019: Podręcznik użytkownika (10 strony)
Drukuj stronę
While doing so, a DMX-terminator must be connected to the last fixture, at the end of the DMX-chain. This
prevents reflections in the DMX-signal, which could cause flickering and unwanted behavior from your
intelligent fixtures.
A DMX terminator is a XLR connector with a resistor of 120 Ohm, placed between pin 2 and 3 as a bridge.
In DMX-mode you are able to control every feature of this fixture by using the following channel settings:
DMX Channels
CH1
CH2
CH3
CH4
CH5
CH6
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 3.0
Channel Value
0
1-200
201-255
0
1-200
201-255
0-----255
0-----255
0-----255
0-----255
Creation date + author initials: 21-11-2013 RV Revision date + author initials: 25-11-2014 RV
Function
The right motor move clockwise
Motor (0º-360º)
The right motor move counter-clockwise
The left motor move clockwise
Motor (0º-360º)
The left motor move counter-clockwise
speed of motor(from fast to slow)
Gobo change of the right scan head
Gobo change of the left scan head
Gobo rotation speed