Cremesso Compact Automatic DC 262 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ekspres do kawy Cremesso Compact Automatic DC 262. Cremesso Compact Automatic DC 262 14 stron.
Drukuj stronę
Making coffee/tea / After making coffee/tea
10
Your first coffee or tea!
Each cup requires one cremesso
capsule. Other capsules will not
work. Vent the piping after long
pauses ➔ page 16. Cup: place un-
der the nozzle. For large cups re-
move upper drip tray with grille
Good to know
The coffee/tea key flashes white after pressing if heating up is still in progress.
Output starts when it stays white. Output quantities can be individually adjust-
ed (➔ page 12 «Coffee output programming»).
Tip: use thick preheated cups for Ristretto and Espresso to keep your coffee
warm. Preheat cup: fill Ristretto
Vent piping: after long pauses (e.g. vacations) the piping will contain air
(➔ page 16 «Flush and vent machine and piping»).
Before changing between coffee and tea: Without capsule, press cleaning
key
to flush out piping (➔ page 16 «Flush and vent machine and pip-
ing»).
1.
3.
2.
Load capsule: 1. Push lever right
back. 2. Let capsule fall squarely
into chute. 3. Pull lever right for-
ward (to puncture capsule)
(without capsule) in cup.
Coffee/tea output: Choose small
, medium
or large
cup
. Output stops auto-
matically (or press key again to stop
before).
Capsule: The capsule may stick in the opening if it has been there a long time.
If so, open and close the operating lever. If the capsule is still blocked, push
down lightly with a finger (caution: hot sharp opening point inside!).
After opening the operating lever, water may drain into the tank. This is nor-
mal and not a fault.
Empty the used capsule container and drainage tank after about 10 bever-
ages or at least once daily to prevent overflow.
Important:
– Beware of hot coffee/tea: danger of scalding!
– Coffee/tea output is only possible with closed operating lever
1.
2.
Eject the capsule: 1. Push operat-
ing lever right back to eject empty
capsule. 2. Pull operating lever right
forward
11