FIAM. MILO 1904/2T Informacje o produkcie - Strona 7

Przeglądaj online lub pobierz pdf Informacje o produkcie dla Wyposażenie wnętrz FIAM. MILO 1904/2T. FIAM. MILO 1904/2T 17 stron.

Safety instructions

• Intended Use

Once removed from its original packaging, the MILO Bedside Table must be placed on a perfectly flat surface.

All the MILO Bedside Table's supporting bases must be resting firmly on the surfaces on which it is placed; otherwise, the MILO

Bedside Table may lose stability, making it hazardously unstable. Weights, objects and loads must be evenly distributed across the

surfaces of the MILO Bedside Table and well balanced in order to ensure stability and safety. Unevenly placed or unbalanced

weights, objects and loads on the surfaces of the MILO Bedside Table may reduce its stability and thus its safety.

Sharp items or anything which may damage the glass (such as chemical products containing hydrofluoric acid) should not be

placed on the surface of the MILO Bedside Table. If objects of this kind are placed on the surface of the MILO Bedside Table in

spite of this warning, you are urged to take adequate precautions to prevent damage to the float glass.

When placing sharp objects on the surface of the MILO Bedside Table, a mat of insulating material (such as rubber, cork, plastic

or leather) thick enough to dampen any impacts should be placed between the float glass surface and the sharp objects. Never

place items which may damage the float glass (such as chemical products containing hydrofluoric acid) on the surface.

• Warnings - Incorrect use and Non-recommended use

Below, we provide a series of warnings and examples of incorrect uses or procedures which reduce the safety of the MILO

Bedside Table.

The series of warnings and incorrect uses or procedures provided below is purely guideline and does not cover all the possible

circumstances for incorrect or non-recommended uses of the MILO Bedside Table, which must be evaluated on each occasion.

Do not sit, lean or stand upon the float glass surface of the MILO Bedside Table.

Do not use the float glass surface of the MILO Bedside Table as a chopping surface.

Do not strike the MILO Bedside Table with hammers or pointed items which may crack or shatter the glass.

Do not use powder detergents or detergents containing abrasives for cleaning the MILO Bedside Table, since they may damage

the float glass.

Do not use the MILO Bedside Table for DIY work or for mechanical, electrical or electronic repairs.

In normal conditions of use, do not tilt the product by more than 10°. Any higher angles might reduce the stability of the MILO

Bedside Table.

Never place items at temperatures below -30°C (such as items just taken out of the freezer), or with temperatures above +30°C

(such as foods just removed from the oven) on the MILO Bedside Table; exposing the surface to stresses of this kind may damage

the glass, reducing its strength and thus its safety level.

Never expose the MILO Bedside Table to intense heat sources (such as stoves or ovens); exposing the table to stresses of this

kind may damage the float glass, reducing its strength and thus its safety level. Do not expose the MILO Bedside Table to

temperatures below -10°C or weather; exposure of this kind may damage the glass, reducing its strength and thus its safety level.

The MILO Bedside Table should be placed well away from items such as coat racks or ornaments which may accidentally fall onto

its surface.

• Moving the Bedside Table

To ensure that the MILO Bedside Table is moved in the conditions of the utmost safety, we urge you to comply with the instructions

provided below:

The Bedside Table must always be handled by at least two people, wearing gloves which assure a good grip on the float glass.

7/16