Digilin Colour Touch VW Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler Digilin Colour Touch VW. Digilin Colour Touch VW 11 stron. Vw dmx controller fw 1.0
Drukuj stronęColour Touch VW - VW DMX Controller FW 1.0
User Manual
1.0 - 2 June 2021
Operation
Software Version
On power up, the Colour Touch VW Controller will scroll text along the screen. The text will indicate the
software version followed by configuration. For this manual, the software version should be a " 1 . x " value
and the type should be "VW". In the software version is different, please contact Digilin Technologies.
User Interface
The Colour Touch VW uses five touch buttons and a display to navigate menus and light settings. The five
buttons include increase/decrease (up/down), left/right, and on/off(middle). The main menu has two items:
"Dim" for dimming and "Cct" for colour temperature. The menus can be switch at anytime using the left and
right keys. The device will always default back to the dimming menu after screen goes to sleep and when
device is turned on. The flow of the menus can be seen in Figure 2: Menu system.
Dimming
Each show on the Colour Touch VW can have a dimming multiplier of 1-100%, this can be controlled via the
"Dim" menu. to access the Dim menu, use the left and right keys until "Dim" is displayed on the Colour
Touch. Then use the up and down arrows to control the level of dimming. 1 = 1% and 100 = 100%
To exit this menu just use the left or right keys.
Note that, depending on the LED driver, dimming may alter the dynamics of Colour Touch VW Controller
shows.
CCT (Correlated Colour Temperature)
The Colour Touch VW can perform colour mixing of the RGB LEDs to create a correlated colour
temperature. This value is displayed in kelvin from 2700K to 6000K. To enter this mode, use the left and right
arrows to scroll to the "Cct" menu. after the correct menu is selected use the up and down arrows to apply
the CCT values to the DMX output. To exit this menu, use the left and right key to change menu.
Note: The default Colour Mixing settings are tuned to Digiln's RGB strip. Use of other branded LED strip may
produce unexpected results. Also, CCT were calibrated at MAX dim level, lower dim levels may affect the
colour.
digilin.com.au
+617 3899 1267
Figure 2: Menu system
Page 6 of 11