Archway COMPETITOR 130 Instrukcja krok po kroku - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja krok po kroku dla Sprzęt budowlany Archway COMPETITOR 130. Archway COMPETITOR 130 12 stron. Standalone model
Drukuj stronę5. Remove the safety pin from the slide to
enable the weight to slide freely.
(Remember to replace this when
transporting the rig)
7. Connect the hydraulic hoses. The pair
hoses from the left hand side of the
control block connect to the hydraulic
cylinder. The pair of hoses from the right-
hand side connect to the chain motor (or
concrete coring attachment when in use)
6. Apply grease to the slide before each
use of the rig. This increases the life of the
brass slides on the weight.
8. The snap-on couplings enable the hoses
to be coupled and uncoupled quickly.