Digilin ColourTheme 3 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler Digilin ColourTheme 3. Digilin ColourTheme 3 20 stron. Rgb dmx controller
Drukuj stronę
ColourTheme 3 - RGB DMX Controller
User Manual
7.1 - 17 September 2020
Notes
•
Install in a dry sheltered position
•
Interior use only
•
Ensure adequate ventilation
•
Installation should only be performed by a qualified professional
•
Install in accordance with all appropriate wiring standards
•
Never connect a LED fitting to a driver that is powered. Doing so may result in damage to the LED.
•
Always make sure the output voltage range and output current of the LED driver match the
requirements of the LED fitting. Failure to do so may result in damage both the driver and fitting.
Introduction
The Colour Theme Controller is a DMX show generator with a simple and intuitive user interface, designed
for use with Digilin's range of LED power controllers. It can have up to 400 pre-programmed shows
in its memory, each dimmable down to 10%, ranging from static colours, to smooth flowing colour changes
though to dynamic bold shows, all of which make full use of the intense, vibrant lighting effects achievable
with LED lighting.
Additionally, the Colour Theme Controller has a serial interface which provides an interface to PC or any
number of lighting control networks.
1
Shows are hard coded into the device and not user configurable. Should you have specific requirements that are not
met by the default shows, please contact Digilin.
digilin.com.au
+617 3899 1267
1
stored
Page 3 of 20