Digilock numeris aspire Instrukcja obsługi produktu - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Zamki Digilock numeris aspire. Digilock numeris aspire 11 stron. Touch rfid latch mechanism
Również dla Digilock numeris aspire: Instrukcja instalacji (16 strony), Instrukcja obsługi produktu (6 strony)
Drukuj stronę
Programming Instructions
Set Lock Functionality
Each lock can be set for either shared or assigned use functionality. Press
use, LED is green.
1
To set for assigned use:
Press
= ` 6 5 `
The red LED will turn on.
Assign User Credentials (for assigned use functionality only)
Make sure that the lock is set for assigned use functionality (a green LED will flash when
and/or User Keys) may be assigned to each lock.
1a
Assign User Codes:
Press
= ` 5 5 `
The LED will turn on.
Insert a valid Manager Key.
A two-tone beep will be heard.
1a
Assign User Keys:
Press
= ` 5 5 `
The LED will turn on.
Insert a valid Manager Key.
A two-tone beep will be heard.
4
2
Insert the Programming Key.
.
A two-tone beep will be heard
and the green LED will flash
once.
1b
.
1b
.
Product Guide
Standard Keypad
Bolt Mechanism
to check functionality. If in shared use, LED is red. If in assigned
=
1
To set for shared use:
Press
= ` 5 6 `
The green LED will turn on.
is pressed). Up to 20 user credentials (User Codes
=
2a
[a new 4-7 digit code]
Press
=
[the same 4-7 digit code]
Press
=
Two sets of two-tone beeps will be heard and the LED will turn off.
2
Insert a User Key.
Two sets of two-tone beeps will be heard and the LED will turn off.
Shared & Assigned Use Functionality
2
Insert the Programming Key.
.
A two-tone beep will be heard
and the red LED will flash
once.
2b
. A two-tone beep will be heard.
`
.
`