Digilock Numeris Versa Mini Instrukcja obsługi produktu - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Zamki Digilock Numeris Versa Mini. Digilock Numeris Versa Mini 11 stron. Touch rfid
Również dla Digilock Numeris Versa Mini: Instrukcja obsługi produktu (11 strony), Podręcznik (18 strony)
Drukuj stronę
Programming Instructions - In Assigned Use Functionality
Remove User Credentials (for assigned use functionality only)
Make sure the lock is in assigned use functionality (a green LED will fl ash when ` is touched). The locks must be reprogrammed to remove
user credentials from operating a lock.
1
Collect all remaining and replacement user credentials
(User RFID Credentials and User Keys).
3
Insert the Manager Key or present the Manager RFID Credential again.
Three sets of two-tone beeps will be heard and the LED will turn off.
All previously assigned user credentials will be removed.
Replace an Assigned User Credential
1
Replace an Assigned User RFID
Credential with a New RFID Credential:
Touch and hold
`
for 5 seconds (a two-tone
beep will be heard after 5 seconds) then release.
Insert a valid Manager Key or present a valid
Manager RFID Credential.
A two-tone beep will be heard and the LED
will turn on.
6
Product Guide
or
2
While the LED is on, present the assigned
User RFID Credential to be replaced.
A two-tone beep will be heard.
Touch RFID
Shared & Assigned Use Functionality
2a
Touch and hold
`
for 5 seconds (a two-tone beep will be heard after 5
seconds) then release.
The LED will start to fl ash.
While the LED is fl ashing, insert a valid Manager Key or present a valid
Manager RFID Credential.
A two-tone beep will be heard.
4
Follow Assign User Credentials instructions to assign the remaining and
replacement user credentials to the locks.
3
While the LED is on, present the new User
RFID Credential.
Two sets of two-tone beeps will be heard
and the LED will turn off.
2b
or