Digilock NEXT cue Instrukcja obsługi produktu - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Przez blokady Digilock NEXT cue. Digilock NEXT cue 6 stron. Rfid interface bolt mechanism
Również dla Digilock NEXT cue: Instrukcja obsługi produktu (5 strony), Instrukcja instalacji (16 strony)
Drukuj stronę
Programming Instructions
Assign User Credentials
Once a user credential is assigned, the previously assigned user credential will no longer operate the lock.
1a
Assign a User RFID Credential:
Press and hold
`
for 5 seconds (a two-tone beep will be heard after 5
seconds) then release.
The LED will turn on.
Insert a valid Manager Key or present a valid Manager RFID Credential.
A two tone beep will be heard.
1a
Assign a User Key:
Press and hold
`
for 5 seconds (a two-tone beep will be heard after 5
seconds) then release.
The LED will turn on.
Insert a valid Manager Key or present a valid Manager RFID Credential.
A two tone beep will be heard.
4
Product Guide
1b
or
1b
or
RFID Interface
Latch Mechanism
Assigned Use Functionality
2
While the LED is on, present the new User RFID Credential.
Two sets of two-tone beeps will be heard and the LED will turn off.
2
While the LED is on, insert a User Key.
Two sets of two-tone beeps will be heard and the LED will turn off.