crescendo BASS CLEF series Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz crescendo BASS CLEF series. crescendo BASS CLEF series 9 stron. Encore-4.5k

+12V (B+), GND, REM

(ENCORE-4.5K)

POWER INPUT

BASS CLEF series

ENCORE-4.5K

GND (GROUND CONNECTION)

For connection to the chassis' ground. For optimum performance 0 gauge cable is recommended.

REM (REMOTE)

Connect to switched +12V from the head unit.

+12V / B+ (POWER CONNECTION)

For connection to the positive terminal of the battery (+12).

For optimum performance 0 gauge cable is recommended.

Before attempting to make any connections to power supply, input and output connectors,

make sure the amplifier is in OFF state. Check polarity of cables carefully as using reversed

polarity will cause damage to amplifier. And to prevent power loss and overheating of wiring,

always use the recommended wire gauges.

Installation of the amplifier should be done in the following steps:

1. Ensure that the ground is appropriate, then connect it to the amplifier.

2. Next step is to connect the +12V wire. Ensure all power terminals are used.

This cable has to be fused at the battery for safety precautions.

3. The final step is connecting the switched remote.

+POWER

GND

CAUTION

REM

GND

POWER INPUT