Digimerge DH100 Series Instrukcja konfiguracji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Monitor Digimerge DH100 Series. Digimerge DH100 Series 2 stron. Touch screen
Również dla Digimerge DH100 Series: Podręcznik szybkiej konfiguracji (2 strony)

Drukuj stronę

DH100 Series Touch Screen Monitor Setup

Step 2 of 3: Power on the Monitor

Step 3 of 3: Test the Touch Screen Functions

Before you start:

1. Make sure your monitor is turned on.

2. Power on your DVR.

3. Wait for the DVR to boot into the main viewing mode.

Access Quick Menu

• While in viewing mode, press and hold anywhere on the screen for 2 or more seconds. Then

remove your finger to open the Quick Menu.

Navigate Menus

• Tap to select menu options.

• To exit menus, press and hold anywhere on the screen for 2 or more seconds. Then remove

your finger. If you have made any setting changes, you will be asked if you want to save changes.

Select Split Screen View

• In the Quick Menu, tap one of the

Split-screen view selectors to open

split-screen view.

Select Channels in Full Screen

• While in a split-screen display mode,

double tap on a channel to view it in full

screen. Double tap again to return to

split-screen display mode.

Access Playback Mode

• In the Quick Menu, tap

Playback Mode.

• Tap the on-screen controls to control

video playback.

• To exit Playback Mode and return to

viewing, press and hold anywhere on

the screen for 2 or more seconds. Then

remove your finger.

to enter

Playback mode

Full-screen mode

Split-screen view

selectors

Quick Menu (8-channel model shown)