Accusound AC-AMA-2 Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Wzmacniacz Accusound AC-AMA-2. Accusound AC-AMA-2 8 stron. Acoustic amplifier

Amplifier AMA-1

MKII Quick start

This is written specifically for the harp play, please substitute your instrument

where ever it says "harp"

Please start by turning the knobs to the positions shown in the picture.

Connect your harp pickup to the input called "Channel 1", top left of the picture.

The input will accept either 3 pin male XLR or 1/4" jack plug.

Connect the mains cable to the mains socket, bottom left and press the top of the

illuminating switch next to it, the switch should illuminate, if not check you have

connected the mains cable correctly and that you have switched on the power at

the mains socket.

If your pickup requires phantom power, please press the small black button to the

left of the red LED under the word "Phantom" at the top right of the picture.

The red LED should now illuminate, if you do not require phantom power please

ignore this step.

Next turn the green knob, top right under "Channel 1 Gain" to position "3".

Now play your harp quite vigorously and see that the LED under the words "Input

Clip" illuminates green. Continue to turn the green gain knob and