Crest Audio CC Przegląd funkcji
Przeglądaj online lub pobierz pdf Przegląd funkcji dla Wzmacniacz Crest Audio CC. Crest Audio CC 2 stron. Cc series
Drukuj stronęPower Specifications
* 1kHz @ <0.05% T.H.D+N / **1Khz @ <0.1% T.H.D+N
FEATURE OVERVIEW:
• Toroidal power transformer
• Dual, variable speed fans on CC 2800 and CC 4000,
single fan on model CC 1800
• Balanced XLR inputs
®
• Speakon
and 5-way binding post speaker outputs
• Mode selector switch for stereo, parallel and
bridged-mono operation
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit-breaker switch
• Five year warranty*
TOURCLASS/PROTECTION CIRCUITS
ACL™ (Active Clip Limiting) prevents speaker damage by
providing gentle gain reduction when the signal approaches the
clipping threshold.
IGM (Instantaneous Gain Modulation) monitors speaker loads
to detect conditions that may overstress output devices. This allows
safe operation into nominal 2Ω speaker loads.
8Ω stereo*
CC 4000
800 W
CC 2800
595 W
CC 1800
450 W
CC 1800/2800/4000
Power Amplifiers
4Ω stereo*
1,350 W
965 W
700 W
AUTORAMP™ gradually increases gain to the attenuator level
settings when the amplifier is turned on.This prevents abrupt turn-on
level.
Other protection features include: short circuit, DC voltage,
comprehensive thermal management and current in-rush turn-on/off
transient and subsonic input.
DESCRIPTION
Crest Audio CC Series amplifiers are designed to achieve
unsurpassed sonic performance and long-term reliability under
extreme stress in touring or fixed installation applications.
Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility with ample
current reserves. Wide-bandwidth output devices ensure
detailed, transparent high frequency response. And, thanks to
Crest's exclusive IGM
loads safely without compromising performance.
CC
S E R I E S
(CC 2800 shown)
2Ω stereo*
4Ω bridged**
2,000 W
4,000 W
1,400 W
2,800 W
900 W
1,850 W
circuit, the CC Series will drive 2Ω
™
™
®