Cisco 1548M Skrócona instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Cisco 1548M. Cisco 1548M 8 stron. 10/100
Również dla Cisco 1548M: Informacje o wersji (4 strony)

Drukuj stronę
Cisco 1548M Skrócona instrukcja obsługi
Assign IP Information to the Switch
The switch is designed to operate with little
or no user intervention. In most cases, you
can use it with its default settings.
Assign IP information to the switch so that
you can use the Cisco 1548 Switch Manager
web-based interface and the switch can
communicate with local routers and the
Internet.
Contact your system administrator for the
switch IP information, and record it here.
Switch IP address:
Subnet mask:
Default gateway:
From the terminal or PC, enter Y:
1
4
Continue with configuration dialog? Y
Enter the IP address (for example:
2
10.1.105.20):
Enter IP address: 10.1.105.20
Enter the subnet mask (IP netmask)
3
(for example: 255.255.255.0):
Enter IP netmask: 255.255.255.0
Enter the IP address of the default
4
gateway (for example: 10.1.105.254):
Enter IP default gateway: 10.1.105.254
The following information is displayed:
The following configuration command
script was created:
ip address 10.1.105.20 255.255.255.0
ip default-gateway 10.1.105.254
!
end
Enter Y:
5
Use this configuration? Y
The following information is displayed:
Building configuration...
Use the enabled mode 'configuration'
command to modify this configuration.
Press RETURN to get started.
Press Return.
6
Exit from the terminal session.
7
You can now display the Cisco 1548 Switch
Manager.