Cisco 2960-48PST-L - Catalyst Switch Biuletyn wsparcia produktu
Przeglądaj online lub pobierz pdf Biuletyn wsparcia produktu dla Przełącznik Cisco 2960-48PST-L - Catalyst Switch. Cisco 2960-48PST-L - Catalyst Switch 2 stron. Switching portfolio
Również dla Cisco 2960-48PST-L - Catalyst Switch: Arkusz danych (21 strony), Arkusz danych (28 strony), Opis (1 strony)
Drukuj stronę
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Cisco Catalyst 2960 48 Power over Ethernet (PoE) Switch
®
®
The Cisco
Catalyst
2960 48 Power over Ethernet (PoE) switch is a new member of the
Cisco Catalyst 2960 Series of fixed-configuration standalone switches with PoE for entry-
level enterprise, midmarket, and small branch office networks. The Cisco Catalyst 2960
Series with PoE allows connectivity to Ethernet-powered devices, including Cisco IP
phones, wireless access points, and video cameras.
The Cisco Catalyst 2960-48PST-L can support 48 PoE ports with total PoE power output capacity
at 370W. Taking advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst
2960-48PST-L configuration can deliver the necessary power to support 24 ports at 15.4W, 48
ports at 7.7W, or any combination in between. Cisco Catalyst 2960 Series with PoE models
support Cisco prestandard PoE and are IEEE 802.3af-compliant.
PoE eliminates the need for wall power to each PoE-enabled device and eliminates the cost for
additional electrical cable and circuits that would otherwise be necessary in IP phone and WLAN
deployments. PoE switches also eliminate the need for power injectors and PoE midspans for
powering IP devices. Table 1 provides a brief description of the new switch.
Table 1.
Cisco Catalyst Power over Ethernet (PoE) Switches
Product Name (Part Number)
Cisco Catalyst 2960-48PST-L
Switch (WS-C2960-48PST-L)
The Cisco Catalyst 2960 Series with PoE offers the following benefits:
Supports 15.4W up to 24 ports, allowing transparent connectivity to PoE devices, including
●
Cisco IP phones, Cisco Aironet
compliant end device.
Cisco EnergyWise to measure, report and reduce energy usage across the entire
●
organization.
Cisco Discovery Protocol (CDP) version 2 allows the switch to negotiate a more granular
●
power setting when connecting to a Cisco powered device, such as IP phones or access
points, than what is provided by IEEE classification.
PoE MIB provides proactive visibility into power usage and allows you to set different
●
power-level thresholds.
Link Layer Discovery Protocol (LLDP and LLDP-MED) adds support for IEEE 802.1AB
●
LLDP for interoperability in multivendor networks.
Description
● 48 Ethernet 10/100 ports with 2 10/100/1000TX and 2 Small Form-Factor Pluggable
(SFP) uplinks
● 1 RU fixed-configuration
● LAN Base image installed
®
wireless LAN access points, as well as any IEEE 802.3af-
Product Bulletin
Page 1 of 2