Cisco 3020 - Cisco Catalyst Blade Switch Uwaga dotycząca wydania - Strona 5

Przeglądaj online lub pobierz pdf Uwaga dotycząca wydania dla Przełącznik Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 21 stron. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Również dla Cisco 3020 - Cisco Catalyst Blade Switch: Podręcznik dla początkujących (37 strony), Podręcznik dla początkujących (31 strony), Quickspecs (12 strony), Uwaga dotycząca wydania (41 strony), Uwaga dotycząca wydania (27 strony), Uwaga dotycząca wydania (23 strony), Instrukcja instalacji (21 strony)

Upgrading a Switch by Using the Device Manager

You can upgrade switch software by using the device manager. For detailed instructions, click Help.

When using the device manager to upgrade your switch, do not use or close your browser session after

Note

the upgrade process begins. Wait until after the upgrade process completes.

Upgrading a Switch by Using the CLI

This procedure is for copying the combined tar file to the switch. You copy the file to the switch from a

TFTP server and extract the files. You can download an image file and replace or keep the current image.

To download software, follow these steps:

Step 1

Use

Step 2

Download the software image file. If you have a SmartNet support contract, go to this URL, and log in

to download the appropriate files:

http://www.cisco.com/kobayashi/sw-center/sw-lan.shtml

Copy the image to the appropriate TFTP directory on the workstation, and make sure that the TFTP

Step 3

server is properly configured.

For more information, see Appendix B in the software configuration guide for this release.

Log into the switch through the console port or a Telnet session.

Step 4

(Optional) Ensure that you have IP connectivity to the TFTP server by entering this privileged EXEC

Step 5

command:

Switch# ping tftp-server-address

For more information about assigning an IP address and default gateway to the switch, see the software

configuration guide for this release.

Download the image file from the TFTP server to the switch. If you are installing the same version of

Step 6

software that is currently on the switch, overwrite the current image by entering this privileged EXEC

command:

Switch# archive download-sw /overwrite /reload

tftp:[[//location]/directory]/image-name.tar

The /overwrite option overwrites the software image in flash memory with the downloaded one.

The /reload option reloads the system after downloading the image unless the configuration has been

changed and not saved.

For //location, specify the IP address of the TFTP server.

For /directory/image-name.tar, specify the directory (optional) and the image to download. Directory

and image names are case sensitive.

OL-14761-01

Table 3 on page 4

to identify the file that you want to download.

Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(44)SE

Upgrading the Switch Software