byer Pangean Glider Instrukcja montażu - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz byer Pangean Glider. byer Pangean Glider 2 stron.
Drukuj stronę
STEP
THREE
Assemble two (2) upper
link bars to Long Frame \
3
2
w/2 ea -
&
Hint!
Flip Long Frame over with
nameplate down for this step
Important Note!
In steps three and four, the #
bolts are screwed into nuts that
are embedded in the wood rails.
See photo below:
B
Please stop for a moment and compare your
assembled chair to the photo on the previous
page to be sure you've got it right!
Remember, call us if you have any question.
We are here to help you
Inner Frame w/upper Link Bars
Inner Frame w/lower Link Bars
2
STEP
FOUR
Assemble two (2) lower
link bars to Long Frame
w/2 ea -
A
Hint!
slotted cross rails as shown in the
photos below.
A
3
2
&
STEP
Hint!
FIVE
on the floor as shown at left for easier assembly.
Slide the Outer Frame over the
A
Inner Frame and link bars, aligning the
remaining holes in the upper link bars with
the holes in the Outer Frame closest to the
slotted cross rail. Fasten with w/2 ea -
B
Align the two remaining holes in the lower link
bars with the last holes in the Outer Frame and
fasten w/2 ea -
STEP
SIX
Fabric cover wraps over the
B
Hint!
Note that the wider end of
the upper link bars should be
oriented as shown in this photo
The enlarged image
above shows the lower link
bar connection to the long
frame assembly.
Lay the two frame halves on their side
3
2
&
Slide fabric cover up through upper
slotted crossrail, insert dowel and seat
the dowel in the slot securely. Draw
the lower end of the fabric cover over
the lower slotted rail and up through
the slot, insert second dowel and
seat securely in the slot
C
3
2
&