Cisco 3750 - Catalyst EMI Switch Instrukcje instalacji - Strona 38

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Przełącznik Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 47 stron. Catalyst 3750 series switches
Również dla Cisco 3750 - Catalyst EMI Switch: Arkusz danych (18 strony), Faq (10 strony), Biuletyn produktu (5 strony), Biuletyn wsparcia produktu (6 strony), Przegląd produktów (25 strony), Opis (1 strony), Arkusz danych (23 strony), Biuletyn wsparcia produktu (6 strony), Podręcznik dla początkujących (27 strony), Arkusz danych (23 strony), Podręcznik dla początkujących (33 strony)

Installing and Removing SFP Modules

Figure 3-34 Incorrect Removal of a StackWise Cable from a StackWise Port

Installing and Removing SFP Modules

Catalyst 3750 Switch Hardware Installation Guide

3-38

S T A C K

These sections describe how to install and remove SFP modules. SFP modules are

inserted into SFP module slots on the front of the Catalyst 3750 switches. These

field-replaceable modules provide the uplink optical interfaces, laser send (TX)

and laser receive (RX).

You can use any combination of SFP modules. Refer to the Catalyst 3750 release

notes for the list of SFP modules that the Catalyst 3750 switch supports. The only

restriction is that each port must match the wave-length specifications on the other

end of the cable, and the cable must not exceed the stipulated cable length for

reliable communications. See the

for cable stipulations for SFP connections.

Use only Cisco SFP modules on the Catalyst 3750 switch. Each SFP module has

an internal serial EEPROM that is encoded with security information. This

encoding provides a way for Cisco to identify and validate that the SFP module

meets the requirements for the switch.

S T A C K

"Installation Guidelines" section on page 3-6

Chapter 3

Switch Installation

C O N S O

L E

78-15136-01