Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Uwaga dotycząca instalacji - Strona 10

Przeglądaj online lub pobierz pdf Uwaga dotycząca instalacji dla Przełącznik Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 28 stron. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Również dla Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Uwaga dotycząca instalacji (14 strony), Podręcznik rozwiązań (17 strony), Uwaga dotycząca instalacji (46 strony), Biała księga (19 strony), Opis (1 strony), Biuletyn produktu (6 strony), Zawiadomienie (4 strony), Arkusz danych (9 strony), Arkusz danych (18 strony), Biała księga (18 strony), Podręcznik konfiguracji (8 strony), Instrukcja rozwiązywania problemów (11 strony), Uwaga dotycząca instalacji (18 strony), Podręcznik użytkownika (17 strony), Uwaga dotycząca instalacji (24 strony), Podręcznik (19 strony), Uwaga dotycząca instalacji (36 strony)

Drukuj stronę
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Uwaga dotycząca instalacji
Environmental and System Requirements

Power Supply

You can place the CSM in any slot in the Catalyst 6500 series chassis except for the slots that are
occupied by the supervisor engine and the standby supervisor engine. The CSM operates on power that
is supplied by the chassis.

Hardware Supported

Before you can use the Catalyst 6500 series CSM, you must have a Supervisor Engine 1A or a Supervisor
Engine 2 with a Multilayer Switch Feature Card (MSFC) or Multilayer Switch Feature Card 2 (MSFC2),
a Policy Feature Card (PFC), and a module with ports to connect server and client networks. The PFC
is required for the VLAN access control list (VACL) capture functionality.
Caution
The WS-X6066-SLB-APC module is not fabric enabled.
Product Number
Content Switching Module
WS-X6066-SLB-APC with Supervisor Engine 1 and MSFC1
or MSFC2
Supervisor Engine 2 with MSFC2
WS-X6066-SLB-APC with Supervisor Engine 720.
Console Cable
72-876-01
Accessory Kit
800-05097-01

Software Compatibility

Software release 4.1(2) requires Cisco IOS Release 12.1(8a)EX or higher. However, the features new to
CSM release 4.1(2) are only available with Cisco IOS Release 12.1(19) E and Catalyst operating system
release 7.6 and subsequent releases.
Table 3
The software release that is listed is the minimum required to support the CSM hardware with a given
supervisor engine to perform basic CSM configuration.
The recommended release is the base release to support new commands for a given CSM release.
Catalyst 6500 Series Switch Content Switching Module Installation Note
10
and
Table 4
list the CSM software release compatibility.
Minimum Cisco
Recommended
IOS Release
Cisco IOS Release
12.1(8a)EX
12.1(13)E
12.1(8a)EX or
12.1(13)E or higher
12.2(17d)SXB
12.2(14)SX1
12.2(14)SX1 or
higher
Not applicable
Not applicable
Recommended
Catalyst OS Releases
N/A
N/A
N/A
78-15751-03