Cisco 8800 Series Główna instrukcja migracji oprogramowania sprzętowego - Strona 15

Przeglądaj online lub pobierz pdf Główna instrukcja migracji oprogramowania sprzętowego dla Przełącznik Cisco 8800 Series. Cisco 8800 Series 31 stron. Hosted enterprise uc ip phone
Również dla Cisco 8800 Series: Instrukcja instalacji sprzętu (25 strony), Podręcznik użytkownika (4 strony), Szybki start (2 strony), Podręcznik (10 strony), Skrócona instrukcja obsługi (3 strony), Skrócona instrukcja obsługi (2 strony), Instrukcja obsługi (2 strony), Podręcznik użytkownika (24 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (28 strony), Skrócona instrukcja obsługi (3 strony), Podręcznik użytkownika (2 strony), Podręcznik użytkownika (30 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (44 strony), Podręcznik (13 strony), Podręcznik (14 strony), Podręcznik (4 strony), Podręcznik (4 strony), Rozpocznij (6 strony), Skrócona instrukcja obsługi (19 strony), Podręcznik konserwacji (6 strony), Szybki start (2 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika końcowego (6 strony), Skrócona instrukcja obsługi (2 strony), Rozwiązywanie problemów (4 strony), Skrócona instrukcja obsługi (7 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (22 strony), Podręcznik (22 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (48 strony), Podręcznik użytkownika (40 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony)

Cisco 8800 Series Główna instrukcja migracji oprogramowania sprzętowego
9.
After reboot, you will be on the transitional load. You will see "Configuration check in progress" and you may see a warning "Failed
to download configuration. Contact your administrator." Do NOT click "Retry". If you click "Retry" the phone will reboot and display
the warning message again. The warning message pertains to Bulk Provisioning. Bulk provisioning is covered in the Appendix.
10. Determine the IP Address of your phone via Settings -> Status -> Network Status -> IPv4.
11. Type the following into your web browser:
12. In your web browser, navigate to Voice -> Provisioning.
13. Scroll down to "Firmware Upgrade" and paste the following into the "Upgrade Rule":
Upgrade Rule:
http:// CUCM-ip-address:6970/sipxxxx.12-5-1SR1-4.loads
Note: This Upgrade Rule points to 12.5(1). This is an Enterprise Firmware image than can be registered to the Unified CM.
14. Scroll down to "Firmware Upgrade" and paste the following into the "Transition Load Authorization Rule".
Transition Load Authorization Rule:
Example Upgrade Rule and Transition Load Authorization Rule:
15. After saving, you should soon see the following message indicating success:
16. After successful upgrade, register the phone to CUCM using DHCP Option 150 or Alternate TFTP.
a)
Select Settings -> Admin Settings -> Network Setup -> IPv4 Setup
b)
Click Apply.
c)
Validate that the phone has registered to Unified CM.
MPP to Enterprise firmware conversion is now complete!
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information.
http://ip_address_of_phone/admin/advanced
http:// CUCM-ip-address:6970/$MAU_M2E.lic
• Alternate TFTP: Yes
• TFTP Server 1: CUCM-IP-address
where sipxxx is the firmware filename on the Unified CM.
Page 15 of 30