Crest Audio CPL 25C+ Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników Crest Audio CPL 25C+. Crest Audio CPL 25C+ 18 stron. Passive 2-way coaxial loudspeaker system

EN
SPECIFICATIONS
Con guration: Compact 2-way coaxial passive speaker
Power Handling*: 200 Watts Continuous, 400 Watts Program, 800 Watts Peak
*To reach the rated power, there must be an infrasonic lter set to 100 Hz, 12 dB / Octave Butterworth minimum ltering. If the CPL 25C + is used with a crossover for a
Subwoofer, then the high pass section needs to meet this criteria at a minimum. A higher frequency and/or lter slope is acceptable.
Nominal Impedance: 8 Ohms
Sensitivity (1W/1m): 94 dB
Maximum SPL (1m): 117 dB @ 200 Watts; 123 dB @ 800 Watts Peak
Frequency Response*: 132 Hz - 20 kHz, ±3 dB
*1m on-axis, swept-sine in anechoic environment
Frequency Range*: 91 Hz - 20 kHz, -10 dB
*1m on-axis, swept-sine in anechoic environment
Box Tuning Frequency: 108 Hz
Nominal Coverage Pattern (-6 dB): 80° H x 80° V
LF Driver: 2 x 5" (130 mm) Woofer - Crest Audio KP5W38
LF Driver Voice Coil: 1.5" (38 mm)
HF Driver: 1 x 1" (25.4 mm) Neodymium Compression Driver - Crest Audio 5C36NP1
HF Driver Voice Coil: 1.4" (36 mm)
Input Connections: 2 x 4-pin twist-lock (NL-4 style) & 1 x 4-pin Euroblock
Input, Pin 1+ = (+) positive; Pin 1- = (-) negative / Loop
rough, Pin 2+ = (+) positive; Pin 2- = (-) negative
Enclosure Material: 0.6" (15 mm) Plywood
Finish: Textured polyurea paint, available in Black & White
Black Finish: RAL: 9004 Signal Black (Pantone: Black 6)
White Finish: RAL: 9003 Signal White (Pantone: 705)
Front: Full-coverage perforated steel grille, backed with acoustically neutral foam
Mounting Provisions: U-Bracket included.
ree (3) M8 suspension points (1 top, 1 bottom, and 1 rear), top and
bottom suspension points for U-Bracket, rear for safety chain or wire and an additional set of four (4) M6
mounting points rear for optional Peavey Versamount 35
Overall Dimensions (HWD):
Front - 14.96" x 7.01" x 7.40" (380 x 178 x 188 mm)
Net Weight: 20 lbs (9.1 kg)
2