Upgrading Your Cisco MDS SAN-OS Software Image
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Use
Table 6
image release number you are currently using in the Current column of the table and use the path
recommended.
The software upgrade information in
Note
system software disrupts IP traffic and SSM intelligent services traffic.
Table 6
Current
SAN-OS 3.1(4)
SAN-OS 3.1(3a) You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
SAN-OS 3.1(2b) You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
SAN-OS 3.1(2a) You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
SAN-OS 3.1(2)
SAN-OS 3.1(1)
SAN-OS 3.0(3a) You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
SAN-OS 3.0(3)
SAN-OS 3.0(2a) You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
SAN-OS 3.0(2)
SAN-OS 3.0(1)
SAN-OS 2.1(3)
SAN-OS 2.1(2e) You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
SAN-OS 2.1(2d) You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
SAN-OS 2.1(2b) You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
SAN-OS 2.1(2)
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1)
14
SSM: Intelligent services traffic on the SSM, such as SANTap, NASB, and FC write
–
acceleration, is disrupted during an upgrade. SSM Fibre Channel traffic is not.
Gigabit Ethernet Ports: Traffic on Gigabit Ethernet ports is disrupted during an upgrade or
–
downgrade. This includes IPS modules and the Gigabit Ethernet ports on the MPS-14/2 module.
Those nodes that are members of VSANs traversing an FCIP ISL are impacted, and a fabric
reconfiguration occurs. iSCSI initiators connected to the Gigabit Ethernet ports lose
connectivity to iSCSI targets while the upgrade is in progress.
IVR: With IVR enabled, you must follow additional steps if you are upgrading from Cisco
–
SAN-OS Release 2.1.(1a), 2.1(1b), or 2.1.(2a). See the
on page 16
for these instructions.
FICON: If you have FICON enabled, the upgrade path is different. See
–
to determine your nondisruptive upgrade path to Cisco SAN-OS Release 3.2(1). Find the
Nondisruptive Upgrade Path to SAN-OS Release 3.2(1)
Nondisruptive Upgrade Path
You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
You can nondisruptively upgrade directly to SAN-OS Release 3.2(1).
Upgrade to SAN-OS Release 2.1(2b) and then upgrade to Release 3.2(1).
or
Upgrade to SAN-OS Release 2.1(2d) and then upgrade to Release 3.2(1).
or.
Upgrade to SAN-OS Release 2.1(2e) and then upgrade to Release 3.2(1).
or
Upgrade to SAN-OS Release 2.1(3) and then upgrade to Release 3.2(1).
Table 6
applies only to Fibre Channel switching traffic. Upgrading
"Upgrading with IVR Enabled" section
Table
7.
OL-14116-01
Drukuj stronę