BYOC Tremelo Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pedał muzyczny BYOC Tremelo. BYOC Tremelo 16 stron.

Drukuj stronę

Populating the circuit board

STEP 1: Add all the resistors. There's a lot of soldering here so take your time....If
you miss one, it will be nearly impossible to figure out what you did wrong later on.
The 1k resistor highlighted in yellow can be changed to a larger value like 2.2k for a
slower rate, but you will lose some of the faster chop
Step 2: Add the 25k trimpot. This pot controls the volume. When you are finished
with the build set it to unity gain.