Accustic Arts AMP I MK 2 Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Odtwarzacz CD Accustic Arts AMP I MK 2. Accustic Arts AMP I MK 2 14 stron.
Również dla Accustic Arts AMP I MK 2: Podręcznik (10 strony)

Drukuj stronę



Refer all servicing to qualified service personnel. Servicing is required when the appliance has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the appliance, the appliance has been exposed to rain or moisture, does not

operate normally or has been dropped.



Never bypass a fuse.



Replace fuses only with original types having the same ampere value, the same voltage endurance

and the same time-lag. You can find the corresponding value in chapter

or on the backside of the apparatus.



No user-serviceable parts inside.

3 Unpacking

Great care must be exercised when unpacking the unit. Carefully store the transportation packaging for

the possibility of further use. If you have a claim on the warranty, always use the original packaging for

any necessary transportation. Transportation without this packaging can lead to damage to the housing.

Please check, if the following items are included:

1 x AC mains cable (type depends on your country)

1 x ACCUSTIC ARTS

2 x batteries for the remote control

1 x replacement fuse (type depends on your mains voltage)

4 Positioning

The DRIVE I – MK 2 has no special requirements regarding its position, but it should be positioned on

stable, even and horizontal surface. You can even put the unit in a cupboard. For reasons of better

access to the various input and output sockets we recommend you position the unit in an audio rack.

Professionally designed audio racks can have a positive effect on the music reproduction of your audio

system.

CAUTION!

Please observe at all times

Before you connect the DRIVE I – MK 2 with some other unit using a cable,

please never forget that both units must first be switched off and

disconnected from the mains power.

system remote control – SRC II

5.4

of this instruction manual