Cisco Catalyst 2900 Series Instrukcja instalacji sprzętu - Strona 24
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Przełącznik Cisco Catalyst 2900 Series. Cisco Catalyst 2900 Series 47 stron. Xl modules
Również dla Cisco Catalyst 2900 Series: Podręcznik (19 strony)
Drukuj stronę
EMC Regulatory Statements
EMC Regulatory Statements
U.S.A.
Taiwan
Avoiding Electrostatic Discharge
Installing a Module
Catalyst 2900 Series XL Modules Hardware Installation Guide
2-2
U.S. regulatory information for this product is in the front matter of this manual.
For translated warnings, see Appendix C, "Translated Safety Warnings."
Before you install the module, ground yourself by touching a piece of metal to
avoid electrostatic discharge (ESD). You should also take the following
precautions to prevent damage to the board:
Keep the module in its antistatic shielded bag until you are ready to install it.
•
Handle the modules by the edges.
•
Do not touch the components, pins, leads, or solder connections.
•
The switch expansion slots are numbered 1 (left) and 2 (right). You can install
either of the modules into either slot. Blank faceplates on the Catalyst 2924M XL
switch cover the slots, as shown in Figure 2-1
Chapter 2
Installation
78-5912-03