Digiscan Labs DNG-2300 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Falownik Digiscan Labs DNG-2300. Digiscan Labs DNG-2300 11 stron.

LOOPBACK INPUT

The DNG-2300 has an input LOOPBACK which allows easy and fast tuning to the necessary level

of noise. Optional probe microphone DNG-MIC and probe stethoscope DNG-STET are used for

the required measurements.

SUPPLIED SET

The DNG-2300 is supplied with AC power cable and user manual. The TRN-2000 and the OMS-

2000 are sold separately. Their quantity depends on the room size and the situation. The probe

microphone DNG-MIC and the probe stethoscope DNG-STET are also sold separately.

REMARKS REGARDING PREPARATION

This instruction manual covers the installation, wiring, and testing of the DNG-2300. Because the

DNG-2300 protects the perimeter of the target area, devices which may be planted in close

proximity to the target speaker's voice may not be jammed by the DNG-2300 system. Therefore

prior to the installation of the DNG-2300 it is recommended to perform thorough sweep

accompanied by a physical search.

When performing detection and location the following tools can be used: radio field indicators (bug

detectors), interceptors, frequency counters, counter surveillance probes, spectrum analyzers, etc.

Contact your dealer for help in choosing the necessary tools or ordering a sweeping service.

While the most accessible listening devices can be detected by the mentioned equipment, there are a

lot of devices which can only be found by physical methods: wired microphones, fiber optic

microphones, passive resonators, inactive remote controlled "dormant" devices, or other non-

detectable devices. Therefore a physical search is a very important part of countersurveillance work.

CONTROLS

FRONT PANEL

Figure 1

1. Power switch

2. Level indicator - Channel 1

3. Level indicator - Channel 2/ Level indicator - LOOPBACK input

4. Level indicator - Channel 3

5. Level adjustment - Channel 1