DigiSender DG44RX Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik DigiSender DG44RX. DigiSender DG44RX 8 stron. Additional wireless receiver

continued...

The DigiSender® Receiver can be connected to a Hi-Fi using the Left & Right Audio outputs

on the rear of the unit.

STEP 4

Connect the 9V DC Power Supply Unit (PSU) to

the socket labelled PSU.

STEP 6

Please read this instruction manual carefully prior to installation

Did you know?

STEP 5

Connect the PSU to an available mains socket.

Press the POWER button on your DigiSender®

Remote Control to switch the Receiver on. The

power LED will light up green to indicate the

device is switched on.

Switch on the television and select the correct

SCART channel using the TV Remote Control. This

may be labelled as one of the following buttons:

AV, VIDEO, VCR, AUX, SCART,

EXT, 0, or

Refer to your tv's manual for further assistance.

DG44RX DigiSender® X7 Additional Receiver

Phono cable may be required.

Page 2