Cisco Catalyst 2960-L Instrukcja instalacji
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przełącznik Cisco Catalyst 2960-L. Cisco Catalyst 2960-L 22 stron.
Również dla Cisco Catalyst 2960-L: Podręcznik dla początkujących (20 strony)
Drukuj stronę
Switch Installation
For initial switch setup, assigning the switch IP address, and powering on information, see the switch getting
started guide on Cisco.com.
This chapter contains these topics:
•
•
•
•
•
•
•
•
•
•
•
Safety Warnings
This section includes the warning statements relating to basic installation. Read this section before you start
the installation procedure.
Warning
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,
and watches). Metal objects will heat up when connected to power and ground and can cause serious burns
or weld the metal object to the terminals. Statement 43
Warning
Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and
equipment damage. Statement 48
Safety Warnings, on page 1
Box Contents, on page 4
Tools and Equipment, on page 5
Installation Guidelines, on page 5
Verifying Switch Operation, on page 6
Installing the Switch, on page 6
Installing the Power Cord Retainer (Optional), on page 12
Installing SFP Modules, on page 15
Connecting to SFP or SFP+ Modules, on page 16
10/100/1000 PoE and PoE+Port Connections, on page 19
10/100/1000 Port Connections, on page 21
Switch Installation
1