DigiSender TV DG258-2RX Instrukcja instalacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Transceiver DigiSender TV DG258-2RX. DigiSender TV DG258-2RX 20 stron. Twin input 5.8ghz wireless av sender system with 2 receivers
Drukuj stronęDG258-2RX - DigiSender HQ2RX - Twin Input 5.8GHz Wireless AV Sender System with 2 Receivers
Troubleshooting
Audio Problems
Q: What seems
to be the problem
with the sound?
Please read the instructions carefully prior to installation
I can see the picture but can't
hear anything.
The sound is distorted.
There is a buzzing sound pres-
ent. It seems to get worse dur-
ing on-screen menus or bright
pictures.
There is a hissing sound and
the volume must be turned up
high on the second TV to hear
anything.
1. Disconnect both the Trans-
mitter AND Receiver SCART
cables. Reconnect the cables
ensuring they are pushed into
the sockets firmly.
2. If you are using a home cin-
ema DVD player with surround
sound, please ensure the ana-
logue audio output on SCART
is switched on.
Turn down the volume on
your source device (Satellite,
Cable, Freeview, DVD or VCR).
Change the Contrast A/B set-
ting on the Transmitter Digi-
Connector™ connected to the
offending equipment.
1. Turn the output volume UP
(if possible) on your source
device (Satellite, Cable, Free-
view, DVD or VCR).
2. Ensure the Transmitter and
Receiver are within the usable
range (40m avg).
3. Switch off your microwave
oven if present.
Page 13