Digisol DG-GR6010 Instrukcja szybkiej instalacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Router sieciowy Digisol DG-GR6010. Digisol DG-GR6010 17 stron. Xpon onu router with 1 pon and 1 giga port
Również dla Digisol DG-GR6010: Instrukcja szybkiej instalacji (20 strony)
Drukuj stronę
1. Installed on the desktop
Place the machine on a clean bench, this installation is relatively simple,
you can observe the following operation:
Ensure the smooth workbench.
●
There should be enough space around the device for heat dissipation.
●
Do not place objects on the device.
●
2. Mounted on the wall
Observation ONU equipment chassis consist two cruciform recess, in
●
accordance with the position of the groove, installed two screws in the
wall.
The original selected two mounting screws gently snap into recesses
●
aligned.
Slowly let go, so that the device under the support of the screw
●
hanging on the wall.
2:2 Panel Lights
LED
Mark
Registration
REG
LINK/
Interface
ACT
System
SYS
Status
Description
On and
The device is registered to the PON system
Green in
colour
Off / Red
Device is not registered to the PON system
in colour
Blink
Device registration is incorrect
Fast Blink Port is sending or/and receiving data
On
Port is connected properly (LINK)
Off
Port connection exception or not connected
Blink
Port is sending or/and receiving data (ACT)
On / Off
System is not running or fatal error
Blink
Normal running