Digisol DG-GR6010 Instrukcja szybkiej instalacji - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Router sieciowy Digisol DG-GR6010. Digisol DG-GR6010 20 stron. Xpon onu router with 1 pon and 1 giga port
Również dla Digisol DG-GR6010: Instrukcja szybkiej instalacji (17 strony)
Drukuj stronę
Troubleshooting
1. After power all the lights are lit?
Reasons:
1) Power connection errors
2) Power is not normal. Solution:
1) Check that the power cable is connected
2) The rear panel of the power supply is turned on.
2. GE / FE led does not light?
Reasons:
1) Network cable is damaged or loose connection
2) Cable type error;
3) Long lines outside the allowable range. Solution:
1) Replace the network cable, and pay attention to the standard
Ethernet cable must be parallel or crossing lines.
3. After working for some time to stop working?
Reasons:
1) Power supply is not working properly
2) The equipment from overheating. Solution:
1) Check if there is contact with abnormal voltage is too high or too low;
2) Check the ambient conditions, vents are normal ventilation.
4. LOS led flashes?
Reasons:
1) Fiber failure;
2) Central office equipment failure. Solution:
1) Inspect fiber is connected properly, is connected to the correct
connector, optical power is normal.
2) Contact your operator.
5. PON led flashes?
Reasons:
1) Fiber optic connector is loose;
2) Central office equipment failure;
3) Fiber optic connectors are dust. Solution:
1) Inspect fiber is connected properly;
2) Cotton ball with alcohol swabbing fiber optic connectors;
3) Contact your operator.