Digisol RANGER SERIES Instrukcja szybkiej instalacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Router sieciowy Digisol RANGER SERIES. Digisol RANGER SERIES 16 stron. 2.4ghz ge outdoor access point with poe
Również dla Digisol RANGER SERIES: Instrukcja szybkiej instalacji (12 strony)
Drukuj stronę
Getting Started
Software Preparation:
Most computers are connecting to a local network with dynamic IP (DHCP) setting.
To access the web UI of the device, you have to change your computer‟s TCP/IPv4
settings into a static IP setting for the Ethernet Interface.
The device‟s default IP address is 192.168.123.50, and your computer must be
assigned with a 192.168.123.x IP address to get access to the device.
Set the TCP/IPv4 address of your computer to 192.168.123.25, and subnet mask
to 255.255.255.0.
After applying this setting, you can now access the web UI for configuring the
device.
Easy Setup via Web UI
You can browse web UI to configure the device. Firstly you need to launch the
Setup Wizard browser first and then the Setup Wizard will guide you step-by-step
11