FIBARO FGBHMS-001 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Czujniki bezpieczeństwa FIBARO FGBHMS-001. FIBARO FGBHMS-001 14 stron. Motion sensor. motion, light & temperature sensor
Również dla FIBARO FGBHMS-001: Instrukcja obsługi (7 strony), Skrócona instrukcja obsługi (18 strony)

Drukuj stronę

NOTE

The accessory mea-

sures temperature in

the place of installa-

tion. Remember that

temperature

near

the ceiling may differ

from that on eye-level

or the floor.

NOTE

The accessory mea-

sures light intensity

in the place of instal-

lation, not where the

sensor is pointed.

FunCTiOnALiTY

#6: Functionality

Motion detection:

The Motion Sensor detects movement using PiR sensor and reports it

to your iOS device.

Blink of LeD indicates detected motion. Color of blink is dependent on

current ambient temperature (smooth transition through blue, green

and red). Brightness of blink is adjusted by measured light intensity.

Tamper detection:

The Motion Sensor detects tampering when accessory is moved and

reports it to your iOS device. Tampering is indicated with an alternate

blinking in red, blue and white.

Temperature measuring:

The Motion Sensor measures ambient temperature every 5 min-

utes. if the measured temperature differs from previously reported

by at least 2°C (3.6°F), accessory reports it to your iOS device.

Battery level measuring:

The Motion Sensor measures battery level every 24 hours and reports

it to your iOS device. Additionally, if battery level is below 15%, the

accessory will report low level battery status to your iOS device.

Light intensity measuring:

The Motion Sensor measures light intensity. if the measured light in-

tensity differs from previously reported by at least 200 lux, accessory

reports it to your iOS device.

PIR sensor malfunction detection (Fault Code 1):

The Motion Sensor detects malfunction of PiR sensor (responsible for

motion detection) and reports it to your iOS device.

Getting Fault Code 1 warning means that the accessory is damaged

and should be returned to the distributor for the warranty (if still valid).