Sharp Carousel R-1514 Dodatkowa instrukcja serwisowa - Strona 23

Przeglądaj online lub pobierz pdf Dodatkowa instrukcja serwisowa dla Kuchenka mikrofalowa Sharp Carousel R-1514. Sharp Carousel R-1514 33 stron. Over the range stainless
Również dla Sharp Carousel R-1514: Broszura i specyfikacje (8 strony), Instrukcja instalacji (40 strony), Podręcznik gotowania (32 strony), Broszura i specyfikacje (5 strony), Instrukcja instalacji (9 strony), Specyfikacje (2 strony), Dodatkowa instrukcja serwisowa (33 strony), Podręcznik gotowania (32 strony), Podręcznik (40 strony)

5. Disconnect only the connector CN-F from the control

unit. It is not necessary to disconnect other connectors

or wire leads from the control unit.

6. Release the oven lamp socket from the magnteron duct

1. Disconnect the power supply cord.

2. Open the door and block it open.

3. Remove three (3) screws holding the hood exhaust

louver to oven cavity front face plate.

4. Remove the hood exhaust louver from the oven by

pushing the right and left tabs of the hood exhaust louver.

(Refer to procedure of "HOOD EXHAUST LOUVER

REMOVAL")

5. Remove one (1) screw holding the control panel to the

oven cavity front face plate.

6. Release the control panel from the oven cavity front face

plate by lifting it up and tilting top edge back.

7. Turn the lamp socket and release it from the magnetron

duct.

7. Remove the oven lamp from the socket by turning the

8. Now the oven lamp is free.

OVEN LAMP SOCKET REMOVAL

8. Screw the oven lamp off from the lamp socket.

9. Now, the oven lamp is free.

10.Pull the wire leads from the oven lamp socket by pushing

11.Now, the oven lamp socket is free.

by turning the socket counterclockwise.

oven lamp.

the terminal hole of the oven lamp socket with the small

flat type screw driver.

Oven lamp

socket

Terminal

Wire lead

Flat type small

screw driver

R-1514

Terminal hole