Sharp Aquos LC-13B8U Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TELEWIZOR LCD Sharp Aquos LC-13B8U. Sharp Aquos LC-13B8U 39 stron. Sharp television lc-13b8u operation manual

Drukuj stronę
Sharp Aquos LC-13B8U Instrukcja obsługi
Switching the Input Modes (INPUT1/
INPUT2/INPUT3/TV)
1
Turn on the power of the connected video equipment.
2
Press INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3
and TV mode each time INPUT is pressed.
INPUT 1 mode
INPUT2 mode
INPUT3 mode
TV mode
A
• INPUT1:
Used for video equipment connected to the COMPONENT input
terminals.
• INPUT2:
Used for video equipment connected to the INPUT2 termi-
nals.
The S-video input terminal is additionally provided for the
INPUT2 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video input
terminal takes priority.
• INPUT3/OUTPUT:
INPUT3 mode is used to adjust the preset settings and IN or
OUT can be selected. INPUT3 indication is not displayed
when OUT is selected. (For details on setting INPUT3
SELECT, see page 22.)
I N P U T 1
4 8 0 P
I N P U T 2
I N P U T 3
2
Basic Operation (Continued)

Sound Volume

■ To adjust the volume
● Press VOL (+) to increase the sound volume.
The bar indicator shifts right.
VOLUME
50
● Press VOL (–) to decrease the sound volume.
The bar indicator shifts left.
VOLUME
10
■ To mute the sound
● Press MUTE to temporarily turn off the sound.
The MUTE mark
is displayed for 4 seconds.
● Press MUTE or VOL (+)/(–) to turn the sound back to the
previous level.
The mute function is automatically turned off when any of
the following buttons are pressed: POWER, MUTE,
VOL (+)/(–) or MTS.
VOLUME
10
A
• When VOL (+)/(–) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
• The Mute function is canceled when POWER is pressed.
■ To select MTS (Multichannel TV Sound)
1
Press MTS to display the MTS screen.
2
Press MTS to select the MTS settings.
STEREO: stereo audio
SAP:
secondary audio program
MONO:
monophonic audio
<
STEREO
ON A I R
<
SAP
ON A I R
MONO
A
• "ON AIR" appears when a STEREO or SAP broadcast is being
aired.
15