Sharp Aquos LC-20S4E Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TELEWIZOR LCD Sharp Aquos LC-20S4E. Sharp Aquos LC-20S4E 20 stron. Lcd colour television

Sharp Aquos LC-20S4E Instrukcja obsługi

Part Names of the Remote Control

BACKLIGHT (P. 12)
Selects the brightness and OPC
(Hold) (P. 14)
Temporarily holds the current
Teletext page.
Switches the LCD TV set
power on or standby.
(Subtitle) (P. 14)
Displays the Teletext Subtitle
OK, Programme Table (P. 8, 12)
(Sound) (P. 9)
Switches to the sound mode.
Right / Left Selection (P. 8)
Red, Picture menu (P. 9, 14)
Green, Sound menu (P. 9, 14)
(+)/(-) ( Volume )
Changes the sound volume.
TV Volume
10
Channel Select
TV input mode: Selects the channel.
This LCD TV set allows you to select
up to 200 channels (0 to 199).
Teletext mode: Selects the page. (P. 14)
Switches the channels between
the currently tuned one
and the previous one.
Switches the input source between
EXT1, EXT2 and TV modes.
Mode:
EXT1
E X T 1
NOTE
• EXT1: Select this mode when viewing the signals from the video
equipment connected to the EXT1 (21-pin Euro-SCART (RGB))
terminal.
• EXT2: Select this mode when viewing the signals from the video
equipment connected to the EXT2 terminals using the VIDEO or
S-VIDEO terminal for video input.
If both VIDEO and S-VIDEO terminals are connected with cables,
the S-VIDEO input terminal is selected as the high priority.
of the display.
(Power)
directly.
(Flashback)
(Input)
EXT2
E X T 2
TV
1 S -
6
(Subpage) (P. 14)
Displays the Teletext Subpage
directly.
(Teletext) (P. 14)
Displays the Teletext mode
screen.
(Reveal) (P. 14)
Displays hidden information
such as solutions to riddles
and puzzles.
ROTATE (P. 10)
Rotates the display in every
direction.
END (P. 8)
Returns to normal screen.
Upwards / Downwards
Selection, Zoom Display
Function (Teletext mode) (P. 8, 14)
MENU (P. 8)
Displays the TV menu.
Returns to the previous screen.
Blue, Status Display (P. 12, 14)
Turns on the status display when
the menu is not displayed.
Yellow, Sleep Timer (P. 12, 14)
(Mute)
Switches the sound on and off.
S o u n d o f f
S o u n d o n
• When
(+)/(-) is pressed in the
Mute mode, the sound turns on, and
the volume indicator is displayed.
• The Mute function is cancelled when
is pressed.
P ( )/( ) (Channel)
TV input mode: Selects the channel.
• Channel "0" is reserved for RF
output of VCR.
• Channels not set with "Automatic
search" or via "Setup" are set to be
skipped and therefore cannot be
displayed using P ( )/( ).
Teletext mode: Selects the page.
(P. 14)
5