Sharp AQUOS LC-24LE430M Instrukcja obsługi - Strona 18
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TELEWIZOR LCD Sharp AQUOS LC-24LE430M. Sharp AQUOS LC-24LE430M 22 stron. Aquos lcd colour television
Drukuj stronę
Controlling HDMI devices
This system is using the HDMI CEC (Consumer
Electronics Control) technology.
What you can do with CEC capable using HDMI
devices
✓
One Touch Play
While the TV is in power on, it automatically plays back
the image from the HDMI source.
While the TV is in power off (standby mode), it
automatically turns on and it plays back the image
from the HDMI source.
✓
Single remote control operation
The TV automatically recognizes the connected HDMI
device and you can control the TV and the devices as
if using a universal remote control.
NOTE
• Point the remote control toward the TV, not to the
connected HDMI device.
• Video noise may occur depending on the type of HDMI
cable used. Make sure to use a certifi ed HDMI cable.
• These operations affect the HDMI device selected as the
current input source. If the device does not operate, turn
on the device and select the appropriate input source using
INPUT.
• When you insert/remove HDMI cables or change
connections, turn on all connected HDMI devices before
turning on the TV. Confi rm that picture and audio are
correctly output by selecting "INPUT1", "INPUT2" or
"INPUT3" from the INPUT SOURCE menu.
CEC function
If this function is activated, you can operate the HDMI
CEC compatible devices using the TV's remote
control.
1
Press CEC and the CEC Menu screen displays.
CEC Menu
Setup
2
Press a / b / c / d to select "CEC function".
3
Press ENTER to select "On" or "Off".
NOTE
Buttons
d
Start playback.
F
Pause operation.
V
Fast forward operation.
Rewind operation.
S
H
Stop operation.
16
CEC function: Off
Auto turn off: Off
Device Discovery
Description
Auto turn off
If this is activated, the HDMI device turns off
automatically when the TV is turned off.
1
Press CEC and the CEC Menu screen displays.
2
Press a / b / c / d to select "Auto turn off".
3
Press ENTER to select "On" or "Off".
Device Discovery
When you insert/remove HDMI cables or change
connections, you may not be able to operate HDMI
devices.
Then you can set to fi nd the HDMI CEC compatible
devices.
1
Turn on all connected HDMI devices before
turning on the TV.
2
Press CEC and the CEC Menu screen displays.
3
Press a / b / c / d to select "Device Discovery".
4
Press ENTER to start Device Discovery function.